Description

Possible usage of the CelloEye 24G RF Detector

• A very simple RF detector, with “RF exists” or “No RF” indication for training, schools, demos…
• A very simple RF detector for finding RF sources & penetration points in a low RF house.
• A cheap RF detector that can be glued to windows, doors, and walls, to allow detection of incoming RF bursts or when people with RF sources come into the Low EMF house (if the RF level in you house is lower than 0.1mW/m2).

CelloEye 24G  RF Detector – No sound/beeper

• Model number: CelloEye 24G (light indication only, no beeping sound!!! for a version with beeping sound please see – https://www.4ehsbyehs.com/product/celloeye-24gs/)
• RF detector with one single led light that lights up whenever RF radiation is detected above the threshold of 0.1mW/m2
• Run using a single CR2032 battery
• The battery can last up to 4 years.
• Wight 18g
• Size
  Height 56mm
  Wide 39mm
  thickness 12mm
• Frequency response 0.05-24GHz
• Sensitivity from 0.1 mW/m2
• Manufacture ENVIROSENCE LTD
• Made in Israel
• Sent from Israel
• This RF detector was developed with our close cooperation and according to our requirements so that it would be used by Electromagnetic Hyper Sensitive(EHS) people to detect RF devices and emissions in their houses, and when RF sources are being entered into their homes.

Videos about CelloEye 24G RF Detector

Link – https://youtu.be/EzDb5nx94GM

RF alarm system using the CelloEye 24G RF detectors – https://youtu.be/uBUsmc80sHo