CORNET ED98QPro5G EMF / EMR METER (RF / ELF-M /ELF-E)

Description

Why buy the CORNET ED98QPro5G meter?

• The CORNET ED98QPro5G is the best All-in-one EMF meter (Radio Frequency-RF, Low-Frequency Magnetic field, Low-Frequency Electric field & Light Flicker & Light strength).
• Other meters with similar RF capabilities are more expensive & are lacking the ability to measure LF-Magnetic and LF-Electric fields.
• Log & Statistical views in RF mode makes this meter a low cost RF analyzer !!!
• Fast sampling RF measurement (will show RF from smartphones, routers, and wireless devices…)
• Detailed display with many informative indications such as Peak value, 15 seconds histogram, Max value (for RF also 15 sec Average, Frequency, log)
• USB connection to PC for power supply and  RF analyzing software
• Alarm and audio feedback
• Led light indication for beginners.
• This meter is a basic effective tool for reducing your exposure to EMF and cooping with Electromagnetic hypersensitivity (EHS).
• It is great for searching for sources in your house, or penetration points of EMF to your house. It should be used before using protection on the house and to track EMF levels around the day.

Why buy here?

• Only here – Special User Guide with info about how to operate the meter, how to read the display, types of radiation, how to do the measurements, levels standards and recommendations, basic steps of exposure reduction, basic steps of handling EHS, how to connect the meter to the PC, and more advanced stuff.
• Only here – a special email with lots of info, videos & guides will be sent to all buyers.
• Only here – initial support by email (send us pictures of measurements and we will try to explain what the meter shows).
• Only here – meters are tested & configured according to our knowledge and experience

Characteristics of the CORNET ED98QPro5G meter

Summary

• The CORNET ED98QPro5G meter is a fast, easy-to-use, very informative, home-use EMF meter
• RF mode for measuring RF(Radio Frequency) from cell towers, smart meters, smart phones, WIFI routers, WIFI equipment, wireless devices, Bluetooth devices, and more (100MHz-8GHz).
• LF600 and LF30 modes for measuring ELF Magnetic fields from power lines, electric cabinets, power cables, electric devices, electronic devices, and more (40-10KHz ).
• EFIELD mode for measuring ELF electric fields from power lines, electric cabinets, power cables, electric devices, electronic devices, and more (40-10KHz ).
• FLK mode – Light Flicker(%) & Light level(LUX) measurement.

The New Version of this meter is called CORNET ED98QPro5G

The CORNET ED98QPro5G is based on the CORNET ED88TPLUS5G2 version, with an addition of the light sensor and measurement.

Special features of ED88TPLUS5G2 and ED98QPro5G versions

1. RF Log display can be set to show RF signals in the last 9 minutes up to 50 hours (depending on the configuration of sampling every 0.5sec … 180sec).
2. RF Statistical view improved to show RF waveform in the last 0.5 seconds (a low-cost RF analyzer) 
3. High sampling rate of 25000 per second (very important in RF).
4. Frequency measurement in RF mode, covering 100MHz to 4200MHz. 
5. 5G indication when the signal’s frequency is in one of the 5G (lower than 6GHz) bands 

General Characteristics and  Features

• Single Axis  RF meter, mW/m², V/m, dBm, bandwidth of  100MHz-8GHz
• Single Axis LFE magnetic meter, mGause, uT, bandwidth of  40-10KHz
• Single Axis LFE Electric field meter, V/m, bandwidth of 50Hz-50KHz
• Sampling rate: 25000/sec, display rate 2/sec.
• Shows the frequency of the highest signal measured if between 100MHz – 4.2GHz.
• Shows RF Average level over last 0.5 seconds or of the last 15 seconds (very helpful)
• Allows you to configure the sensitivity of the LED POWER BAR
• Adjustable Alarm in RF mode.
• Hold button
• Unit Button
• Internal antenna and sensors.
• Detailed LCD display
• Very fast 25000/sec (Every time the meter display readings they are based on 12500 samples).
• Histogram – shows the radiation levels measured in the last 15 seconds on a graph.
• Audio feedback (let you hear the RF modulation)
• Backlight
• 9V battery (comes with a disposable battery).
• 30 days money-back guarantee
• 1-year limited warranty (item needs to be shipped back to Israel).
• Made in the USA
• Ships from Israel.

Legacy of improvements, ease of use, and valuable information

The first version of the CORNET ED88TPlus meter was an improvement of the CORNET ED88T which was our best-seller, and the best value-for-money meter from 2016 to 2017.  It has proved to be easier to operate and more flexible in usage than the CORNET ED88T. Since the debut of the CORENT ED88TPLUS, 2 new versions went into production, “V2” and now “5G”. In each version, there are several improvements and enhancements.  

What can it measure?

The CORNET ED88TPlus 5G2 meter can measure ELF(Extremely Low Frequency) Electric field (from 10V/m), ELF magnetic field (from 0.1mG) and RF (Radio Frequency) radiation (100MHz up to 8GHz) EMF/EMR (Electromagnetic Fields / Electromagnetic Radiation).  In RF mode it will show you the frequency of the highest signal (between 100MHz and 4.2GHz), It has audio feedback and an audio alarm feature. Another improvement is that it can show an average level over the last half a second and in the last 15 seconds(user can select).  

Fast and informative

The  CORNET ED98QPro5G meter is very fast, with 25000 samples a second. This meter can be very useful for most people as it is very fast, easy to operate, give results in a numeric fashion, has an adjustable color led bar, Sound feedback, Battery strength indication, and very importantly has a histogram with 30 last peak measurements(last 15 seconds). Using the histogram can let you easily find, track and measure RF/ELF sources that transmit only for a fraction of a second, every few seconds.

Advanced info and features of the CORNET ED98QPro5G meter

RF Log View

In addition to the Histogram, this meter also has lots of other informative information displayed in RF mode that makes the process of understanding what is the source of the radiation, and where it is coming from, much easier. Features like a frequency meter, several types of Average, statistical view, and LOG features, make it much more than a meter, it is more of an RF analyzer.

LOG Zoom view in RF mode (when log interval is set to 0.5Sec)

LOG view in RF mode (when log interval is set to 0.5Sec)

RF Log setup and view of a RF signal history/wave form

The user can setup the RF log resolution to be 1mSec. In this case, the RF waveform will be displayed in Log view.
Enter setup by pressing UNIT+MODE buttons.

RF waveform displayed in Log view (when log interval is set to 1mSec)

RF Waveform in Statistical view

Enter Statistical view by pressing HOLD and then UNIT

Best “all in one” meter (06/2022)

Its’ ability to measure ELF magnetic field, RF radiation up to 8GHz, and the histogram display make it the best first meter for EHS and a first basic tool in the process of EMF reduction and handling EHS. There are better, more accurate, more expensive RF meters on the market today (03-2023), but the overall performance, ease of use, measuring both RF, ELF magnetic and electric fields, the advanced display and it many features, makes it, in my opinion to the best-cost effective EMF meter on the market today.  

Video of the CORNET ED98QPro5G meter 

Link — https://youtu.be/UKFBZLq7bR8

Videos of the CORNET ED88TPlus5G2 meter

08/2021 – New features of V2 explained – https://youtu.be/fZCqz8bhiH4 Quick operational CORNET ED88TPLUS –  https://youtu.be/uA1Oqip4uy4      CORNET ED88TPLUS unboxing and Presentation –  https://youtu.be/9UQigqsNOfU

EMF Measurement quick start guide with CORNET ED88TPLUS

Video – https://youtu.be/TtZkHmBGHRw

Recording your RF measurement on a PC

The CORNET ED98QPro5G supports a connection to a PC and recording of the RF measurement. This feature is usually available in high-end meters. but now available also on the CORNET ED98QPro5G. In order to operate this feature, you need to connect the meter to the PC via MICRO USB cable (recommended directly to the PC and not via USB Hubs), install the drivers(on USB to UART mode), and install and run the software. PC Drivers for CORNET ED88T PLUS Monitoring software from envirosense   

Strong points

• Very fast sampling rate- Most important!
• Both RF and ELF (magnetic & Electric fields) in one cheap meter.
• RF Frequency meter.
• Histogram display
• Easy to use
• Easy to take with

Limitations 

• Will show only part of the RF level when measuring multi-frequency sources, or several sources at once (like most RF meters).
• ELF measurement in only one axis makes it a bit hard to measure.

Usage 

• For RF measurement hold it vertically
• For ELF measurement, measure in X,Y and Z axis.
• Measure RF and ELF levels.
• Track and find EMF sources.
• Find hot-spot and RF penetration to your house.
• Can detect ELF sources & RF sources like WIFI, DECT, WIMAX, LTE, UMTS, CDMA, GSM, BLUETOOTH, ZIGBEE, Cell phone mast/antenna, Smart meters, Radar, Microwave ovens, wireless PC and Tablets, routers, and other RF sources

Price and Delivery options

• Shipped from Israel
• Tax may be subjected according to your country’s laws
• ECO POST / Registered Air Mail or EMS
• המחירה באתר זה ללקוחות חו”ל בלבד. למזמינים לישראל, יש להזמין מהאתר הישראלי, לחצו כאן…

More features

• RF mode from 100MHz up to 8GHz.
• ELF mode(LF600) from 50Hz to 10KHz. Up to 600mG.
• ELF mode(LF30) from 50Hz to 1KHz, very sensitive mode limited up to 10mG (ELF sensitivity from 0.05mG).
• Audio-sound feedback in RF mode.
• Adjustable audio alarm in RF mode to levels of  0, -5, -10 ,-15, -20, -25, -30, -35 dBm.
• Shows Max measured RF value out of the 12500 samples taken every 0.5 seconds.
• Shows RF Max level since power-up in RF mode.
• Shows RF Average level over last 0.5 seconds or since measurement started.
• Very Sensitive:
  • RF down to 0.0005mW/m²( -60dBm)
  • ELF Magnetic field down to 0.05mG
  • ELF E field down to 10V/m (and up to 1000V/m)

Package contains:

• CORNET ED88TPlus 5G2 EMF / RF meter
• English Manual
• 9V Disposable battery (we recommend the use of a reachable battery)

More info and links about the CORNET ED88TPlus 5G2 EMF / RF meter

• Review on www.norad4u.com:
• Manufacturer site: www.cornetmicro.com
• Click here for the manufacture data sheet…

Manufacturer’s data sheet:

Operation mode: Tri-mode of operation

• (RF mode): High-frequency RF Broadband
• (Gauss mode): Low-frequency Magnetic field
• (Electric Field mode): Low-frequency Electric field

Frequency range & sensitivity:

• RF mode: 100MHz to 8.0GHz
• 60dBm to +5dBm, 14mv/m-26v/m, 0.5uw/m-sq to 1.8 w/m-sq
• Gauss mode: (1)50Hz to 10KHz (0.1uT to 50uT)/ (1mG to 500mG) ,  (2)50Hz to 1KHz (0.01uT to 1uT)/ (0.1mG to 10mG)
• Electric field mode: 50Hz – 10KHz (10v/m to 1000v/m)

Display mode:  dBm, mW/m2, V/m, uT, mGauss, MHz Display: Graphics LCD  multi-digit power level display, moving  Histogram, level  bar display, color LED segment. Function:   RF power level, LF magnetic field strength, Electric Field  strength, signal frequency, Hold, MAX, Peak Average, Average, Sound output, audio Alarm, custom LED level, Duty cycle